Burn's Property
This is one of many QSI projects that have been done with Mike over the years. We we're tasked with building a structure for his daughter's wedding, and we're glad that all the hard work paid off in time to see it through!
"Honestly, I couldn't have done it without QSI."
Project Details
If you are wanting to see what all went into building this structure, then see our details listed below.
80' width x 120' length x 14' inside height
4' o/c scissor trusses; 20-5-10 standard loading; 6/12 top pitch; standard lower pitch
16inch o/c 2x6 stud wall
29 gauge painted steel in desert sand
29 gauge painted steel in burnished slate
5/8 OSB under 29 gauge painted steel in burnished slate
18" boxed overhangs on 2-sides and 2-gables with burnished slate soffit and fascia
15,200 sqft of weatherwrap microfoil insulation on sides and roof
(3) 3'x6'8" steel 9-lite entry doo
(1) 3'x6'8" residential fiberglass 9-lite entry door
(19) 3x4 Single-hung insulated windows
(1) 3x3 single-hung insulated window
(2) 10x8 Overhead door,
(1)12x12 Overhead door,
(1)12x14 Overhead door
(1) 9x8 Overhead door
(1) 10x10 Overhead door
(1) 20x120x14 ends enclosed on eave lean-to with 2/12 pitch and 18" boxed overhangs
(1) 20x48x14 open on eave lean-to with 2/12 pitch, 18" boxed overhangs and steel ceiling
(1) 10x18x9 open gable out lean-to with 6/12 pitch and 18" boxed overhangs
(1) 10x68x9 open below eave lean-to with 2/12 pitch, 18" boxed overhangs and steel ceiling
9600sqft of 5" concrete floor with 2" o/c rebar inside building with vapor barrier
3700 sqft of 4" concrete floor outside building
